Function and Seasonal Component Forecast
(Time Series)
Synopsis
This operator trains an Function and Seasonal Component Forecast model.Description
The model contains of a polynomial function which describes the trend of a time series and a seasonal component with length seasonality which describes the seasonal effects of a time series.
A forecast for a time series is created by evaluating the polynomial function to determine the trend values and adding or multiplying (depending on the decomposition mode of the performed decomposition) the corresponding values of the seasonal component.
This operator trains a Function and Seasonal Component Forecast model by first performing a decomposition (for the type of decomposition see parameter decomposition method) on the time series to determine trend and seasonal component. The seasonal component is directly used for the Forecast model. A polynomial fit (degree specified by the parameter degree) is performed on the trend values. The fitted function is provided to the Forecast model.
If no decomposition is selected, no decomposition is performed on the time series. The seasonal component will have a length of 1 and a value of 0. The polynomial fit is then performed on the original time series values and not on the decomposed trend values.
If no fit is selected, the polynomial function is not fitted and a constant with value 0 (in case the decomposition mode is additive) or 1 (in case the decomposition mode is multiplicative) is used for the function.
This operator works only on numerical time series.
Differentiation
This operator is similar to other modeling operators, but is specifically designed to work on time series data. One of the implications of this is, that the forecast model should be applied on the same data it was trained on.
Apply Forecast
This operator receives a trained Forecast Model (e.g. the Function and Seasonal Component Forecast model) and creates the forecast for the time series it was trained on.
ARIMA
This operator trains an ARIMA model (Autoregressive Integrated Moving Average) on time series data to perform a forecast.
Default Forecast
This operator trains a Default Forecast model (predicting single value) on time series data to perform a forecast.
Holt-Winters
This operator trains a Holt-Winters model (triple exponential smoothing) on time series data to perform a forecast.
Input
example set (Data Table)The ExampleSet which contains the time series data as an attribute.
Output
- forecast model (IOObject)
The Function and Seasonal Forecast model fitted to the specified time series attribute. It also contains the original time series values.
- original (Data Table)
The ExampleSet that was given as input is passed through without changes.
Parameters
- time_series_attribute
The time series attribute (numerical) for which the Function and Seasonal Component Forecast model should be build. The required attribute can be selected from this option. The attribute name can be selected from the drop down box of the parameter if the meta data is known.
Range: - indices_attribute
The attribute holding the indices values of the time series. It can be either a date, date_time or numeric value type attribute. The attribute name can be selected from the drop down box of the parameter if the meta data is know
Range: - sort_time_series
If this parameter is selected, the input time series will be sorted, according to the selected indices attribute, before the time series operation is applied on. If it is not selected and the input time series is not sorted, a corresponding User Error is thrown.
Keep in mind that the indices values still needs to be unique. If the values are non-unique a corresponding User Error is thrown.
The data set provided at the original output port will be the sorted input time series.
Range: - decomposition_method
This parameter defines the kind of decomposition used to determine the trend and seasonal components of the time series. The seasonal component is directly used for the Function and Seasonal Forecast model, the trend component is used to fit the polynomial function to it.
- no decomposition: No decomposition is performed. The seasonal component will have a length of 1 and a value of 0. The polynomial fit will be performed on the original time series values
- classic decomposition: A Classic Decomposition is performed (see operator Classic Decomposition).
- STL decomposition: : A STL Decomposition is performed (see operator STL Decomposition). The decomposition mode is set to additive.
- function_fitting_method
This parameter defines the method to fit the function for the Forecast model. The function is fitted on the decomposed trend values, if the decomposition method is not no decomposition. Then the fit is performed on the original time seires values.
- no fit: The function is not fitted and a constant with value 0 (in case the decomposition mode is additive) or 1 (in case the decomposition mode is multiplicative) is used for the function of the Forecast model.
- polynomial function: A polynomial function of the degree specified by the degree parameter is fitted. Invalid values are ignored by this fit. See operator Extract Coefficients (Polynomial Fit) for more details.
- degree
This parameter is only visible if function fitting method is polynomial fit. This parameter defines the degree of the polynomial function fitted to the time series.
Range: - decomposition_mode
This parameter is only visible if decomposition method is classic decomposition. The mode, how the different components are combined.
- additive: Trend, seasonal and remainder component are added to build the time series: Y = T + S + R. Used if seasonal and remainder component are independent of the trend level.
- multiplicative: Trend, seasonal and remainder component are multiplied to build the time series: Y = T x S x R. Used if the magnitude of seasonal and remainder component depends on the trend level.
- seasonality
This parameter is only visible if decomposition method is classic decomposition or STL decomposition. The length of one seasonal pattern of the seasonal component. For example for a seasonal pattern which occurs every year the seasonality is 4 (for quartely data), 12 (for montly data) or 52 (for weekly data). Or for a pattern which occurs every hour the seasonality is 60 (for minutely data) or 3600 (for secondly data).
Range: - ignore_invalid_values
This parameter is only visible if decomposition method is classic decomposition. If this parameter is set to true invalid values (missing, positive and negative infinity) are ignored in the computation of the trend component of the classic decomposition.
Range: - default_robust_calculations
This parameter is only visible if decomposition method is STL decomposition. This parameter defines if the decomposition includes default settings for robust iterations to handle outliers. The number of inner iterations is set to 1 and the number of robust iterations to 15.
Range: - inner_iterations
This parameter is only visible if decomposition method is STL decomposition. This parameter defines the number of inner iterations performed to improve the accuracy of the estimation of the decomposition components.
Range: - robust_iterations
This parameter is only visible if decomposition method is STL decomposition. This parameter defines the number of robust (outer) iterations peformed to reduce the effect of outliers on the estimation of the trend and the seasonal component. Can be set to 0, if no outliers are expected in the data.
Range: - seasonal_smoothing_settings
This parameter is only visible if decomposition method is STL decomposition. This parameter defines which settings of the seasonal smoothing are set by the user and which are set to default values by the operator. The seasonal smoothing has 3 parameters, the seasonal width, the seasonal degree and the seasonal jump. See the description of the individual parameters on their effects and their default settings.
- default: Only seasonal width has to be specified.
- periodic: This option contrains the seasonal component to be exactly periodic. All three parameters are set by the operator.
- width and degree: seasonal width and seasonal degree have to be specified, seasonal jump is set to the default value.
- width and jump: seasonal width and seasonal jump have to be specified, seasonal degree is set to the default value.
- all: All three parameters have to be specified.
- seasonal_width
This parameter is only visible if decomposition method is STL decomposition. The width of the Loess smoother to determine the seasonal components. Has to be larger than 2 and uneven. If seasonal width is even, it is automatically increased by one. A large seasonal width reduce the rate of change of the seasonal component over time. Has always to be specified, except the seasonal smoothing settings is set to periodic. In this case the seasonal width is set to 100 times the length of the time series.
Range: - seasonal_degree
This parameter is only visible if decomposition method is STL decomposition. The degree of the polynomial used in the Loess smoothing. Has to be 0, 1, or 2 and defaults to 1. If the seasonal smoothing settings is set to periodic the degree is set to 0.
Range: - seasonal_jump
This parameter is only visible if decomposition method is STL decomposition. The number of points skipped between the Loess smoothing. Has to be larger than 0 and defaults to 10% of the seasonal width (ceiled).
Range: - trend_smoothing_settings
This parameter is only visible if decomposition method is STL decomposition. This parameter defines which settings of the trend smoothing are set by the user and which are set to default values by the operator. The trend smoothing has 3 parameters, the trend width, the trend degree and the trend jump. See the description of the individual parameters on their effects and their default settings.
- default: For all three parameters the default values are used.
- flat: The trend component is forced to be flat. All three parameters are set by the operator.
- linear: The trend component is forced to be linear. All three parameters are set by the operator.
- width: Only trend width has to be specified.
- degree: Only trend degree has to be specified.
- jump: Only trend jump has to be specified.
- width and degree: trend width and trend degree have to be specified, trend jump is set to the default value.
- width and jump: trend width and trend jump have to be specified, trend degree is set to the default value.
- degree and jump: trend degree and trend jump have to be specified, trend width is set to the default value.
- all: All three parameters have to be specified.
- trend_width
This parameter is only visible if decomposition method is STL decomposition. The width of the Loess smoother to determine the trend components. Has to be larger than 2 and uneven. If trend width is even, it is automatically increased by one. The trend width increases the smoothing effect on the trend component. If the trend smoothing settings is set to flat or linear the trend width is automatically set to 100 times seasonality times length of time series. If it is not specified by the user, the trend width defaults to floor(1.5 x seasonality / (1 - 1.5 / seasonal width) + 0.5).
Range: - trend_degree
This parameter is only visible if decomposition method is STL decomposition. The degree of the polynomial used in the Loess smoothing. Has to be 0, 1, or 2 and defaults to 1. If the trend smoothing settings is set to flat or linear the trend width is automatically set 0 (flat) or 1 (linear).
Range: - trend_jump
This parameter is only visible if decomposition method is STL decomposition. The number of points skipped between the Loess smoothing. Has to be larger than 0 and defaults to 10% of the trend width (ceiled).
Range: - lowpass_smoothing_settings
This parameter is only visible if decomposition method is STL decomposition. This parameter defines which settings of the lowpass smoothing are set by the user and which are set to default values by the operator. The lowpass smoothing has 3 parameters, the lowpass width, the lowpass degree and the lowpass jump. See the description of the individual parameters on their effects and their default settings.
- default: For all three parameters the default values are used.
- width: Only lowpass width has to be specified.
- degree: Only lowpass degree has to be specified.
- jump: Only lowpass jump has to be specified.
- width and degree: lowpass width and lowpass degree have to be specified, lowpass jump is set to the default value.
- width and jump: lowpass width and lowpass jump have to be specified, lowpass degree is set to the default value.
- degree and jump: lowpass degree and lowpass jump have to be specified, lowpass width is set to the default value.
- all: All three parameters have to be specified.
- lowpass_width
This parameter is only visible if decomposition method is STL decomposition. The width of the Loess smoother to smooth (and with that remove) the seasonal components from the time series data. Has to be larger than 2 and uneven. If lowpass width is even, it is automatically increased by one. If it is not specified by the user, the lowpass width defaults to seasonality.
Range: - lowpass_degree
This parameter is only visible if decomposition method is STL decomposition. The degree of the polynomial used in the Loess smoothing. Has to be 0, 1, or 2 and defaults to 1.
Range: - lowpass_jump
This parameter is only visible if decomposition method is STL decomposition. The number of points skipped between the Loess smoothing. Has to be larger than 0 and defaults to 10% of the lowpass width (ceiled).
Range:
Tutorial Processes
Function and Seasonal Component Forecast on monthly milk production
This tutorial process shows the basic usage of the Function and Seasonal Component Forecast operator, by training a Function and Seasonal Component model on the Monthly Milk Production data.
